Dimensional Tolerance
| Dimensional Tolerance Table | |||
| Production method | Form | Size range (mm) | Production standard |
| Hot rolled | Round | 12 – 340 mm | EN 10060* |
| Hot rolled | Hexagon | 15,5 – 100 mm | EN 10061 |
| Hot rolled | Square | 10×10 – 250×250 mm | EN 10059 |
| Hot rolled | Flat | 10×3 – 150×60 mm | EN 10058 / 10092 |
| Hot rolled | Wide flat | 160×20-500×80 mm | DIN 59200 |
| Hot rolled | Wire rod | 4 – 36 mm | EN 1017 |
| Cold drawn | Round | 4-90 mm | EN 10278 h9/10/11 |
| Cold drawn | Hexagon | 6-70 mm | EN 10278 h9/10/11 |
| Cold drawn | Square | 8-60 mm | EN 10278 h11 |
| Cold drawn | Flat | 10×5 – 150×30 mm | EN 10278 h11 |
| Peeled | Round | 15-160 mm | EN 10278 h9/10/11 |
| Ground | Round | 10-80 mm | EN 10278 h7/h8/h9 |
| Forged bars | Round | 200-1000 mm | UNE 36-514-84 |
| Forged bars | Square | 150-1000 mm | UNE 36-514-84 |